What to do if a function does not work when the button is pressed on Samsung Soundbar?
If a function on your Samsung Soundbar does not work when the button is pressed, it might be due to static electricity in the air. Disconnect the power plug and connect it again to resolve this.
Why is there no sound coming from my Samsung HW-J8501R?
If no sound is coming from your Samsung Speakers, first ensure that the Mute function is off by pressing the (Mute) button. Also, verify that the volume isn't set to the minimum. If it is, adjust the volume to a comfortable level.
Why is my Samsung Speaker System remote control not working?
If your Samsung Speaker System remote control isn't working, first replace the batteries with new ones. Also, ensure that you are not too far from the main unit.
What to do if my Samsung Soundbar remote control does not work?
If your Samsung Soundbar remote isn't working, the batteries might be dead, or you might be too far from the unit. Try replacing the batteries with new ones and move closer to the Soundbar.
Why is my Samsung Soundbar remote control not working?
If your Samsung Soundbar remote control isn't working, it could be due to drained batteries or excessive distance between the remote and the main unit. Try replacing the batteries with new ones and moving closer to the unit.
What to do if the red LED on my Samsung HW-J8501R Speakers subwoofer blinks?
If the red LED on the subwoofer of your Samsung Speakers is blinking and no sound is produced, it might not be connected to the main unit. Try connecting your subwoofer again.
What to do if Samsung HW-J8501R remote control is not working?
If your Samsung Speakers remote control isn't working, the batteries may be drained, so replace them with new ones. Also, make sure that you are not too far from the main unit. Try moving closer to the unit.
How to fix Samsung HW-J8501R Speakers TV SoundConnect pairing failed?
If TV SoundConnect pairing fails on your Samsung Speakers, first ensure your TV supports TV SoundConnect, which is available on some Samsung TVs released from 2012. Update your TV with the latest firmware. Try resetting TV SoundConnect and connecting again by pressing and holding the p button for 5 seconds.
Why did the TV SoundConnect (TV pairing) fail on my Samsung Soundbar?
TV SoundConnect is supported by some Samsung TVs released from 2012. Check your TV to see if it supports TV SoundConnect. Update your TV with the latest firmware. If an error occurred, reset TV SoundConnect and connect again. To reset the TV SoundConnect connection, press and hold the p button for 5 seconds. If all else fails, contact the Samsung Call Centre.
How to stop Samsung Speaker System subwoofer from droning?
If your Samsung Speaker System subwoofer drones and vibrates noticeably, press the WOOFER button on your remote control to adjust the subwoofer's volume level (between -12, -6 ~ +6).
General| Brand | Samsung |
|---|---|
| Model | HW-J8501R |
| Type | Soundbar |
| Total Power Output | 350W |
| Subwoofer | Yes |
| Wireless Subwoofer | Yes |
| Bluetooth | Yes |
| HDMI Inputs | 1 |
| HDMI Outputs | 1 |
| Optical Inputs | 1 |
| USB Ports | 1 |
| Wall Mountable | Yes |
| Surround sound formats | Dolby Digital, DTS |
| Connectivity | Bluetooth, HDMI, Optical, USB |
| Audio inputs | Optical, USB |
To Next Page
