TRANSFERRING WITH CAMP-ON
When you transfer a call to another station and receive a busy signal, you can camp the call on
to this station. Hang up when you hear the busy signal. The called party is alerted that a call is
waiting.
NOTE: If you receive No More Calls tone, the station has no key available to receive another
call. Press TRANSFER to return to the caller.
CALL WAITING
If an outside call is camped-on to your telephone or another station is camped-on to you:
! Your keyset rings and the call that is waiting (camped-on) flashes green.
! Press the flashing button to answer; the other call is put on hold automatically if
your station has the Automatic Hold feature set. If not, you must press HOLD and
then the flashing button or finish the call and hang up; the waiting call will ring.
! Lift the handset or press the ANS/RLS key to answer.
NOTE: Intercom calls will not go on Automatic Hold.
CONFERENCE CALLS
To make a conference call while engaged in a conversation:
! Press the CONF button and receive conference tone.
! Make another call, either intercom or outside, press the CONF button and receive
conference tone.
! Make another call or press the CONF button to join all parties. You can conference
up to five parties (you and four others).
! Repeat the last step until all parties are added. Hang up to leave the conference
call.
NOTE: When attempting to add another party to the conference and you are not able to
reach the desired person, hang up. Press the CONF button again to return to the
previous conversation.
FORWARDING CALLS
You can forward your calls to another station, group of stations, or an external telephone
number. Program a destination for the type of forwarding you want as detailed below. If
you have the FWD ALL, FWD BUSY, and FWD NO ANSWER keys, press the associated
soft key to activate the feature. A steady red light reminds you what forward condition is
activated.
Clear all call forward conditions set at your station by lifting the handset and dialing 600.
FORWARD ALL CALLS
To forward all your calls to another station:
! Dial 601 plus the extension or group number.
! Receive a confirmation tone and hang up.
FORWARD BUSY
To forward calls to another station when you are on the phone:
! Dial 602 plus the extension or group number.
! Receive a confirmation tone and hang up.
FORWARD NO ANSWER
To forward calls to another station when you do not answer:
! Dial 603 plus the extension or group number.
! Receive a confirmation tone and hang up.
FORWARD BUSY/NO ANSWER
If you have both a Forward On Busy destination and a Forward No Answer destination
programmed, you can activate them simultaneously:
! Dial 604.
! Receive a confirmation tone and hang up.
SET ANSWER MODE
You can receive internal call in one of three modes:
! While on-hook, press TRANSFER and then dial 103.
! Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce.
! Press TRANSFER to store your selection.
NOTE: When your keyset is programmed for Auto Answer and you have Forward No
Answer (FNA) turned on, you must answer screened transfers by pressing the ANS/RLS
key before your FNA timer expires or the call will forward.
To Next Page
Loading...
