Samsung iPOLiS - Encoder Properties

iPOLiS Network Design Tool User Guide
Functions
17
 Description: Input the relevant information on the camera.
 Quantity: Display the number of cameras for group object.
B. IP Configuration: Network information of a camera object.
 Address Type: Specify one of network address type.
 IP Address: Enter network IP address.
 Subnet Mask: Enter subnet mask address.
 Gateway: Enter network gateway address.
 DNS Server: Enter DNS server address.
C. Advanced Setup: Open the advanced setting window for video profile setting of a camera.
 Unit ID: Select ID of camera.
 Apply to others: Apply profiles to other selected camera.
 IP Assign: Set the network address of single device or multiple devices.
 Scene activity: Specify how complex scene and frequent movement the video has. If a
video includes complex patterns or a lot of movements, select ‘HIGH’. Otherwise, the
video includes simple background and rare movement, select ‘LOW’
 Use: Select or clear whether the camera uses multiple profiles or not.
 Profile options (Codec/Resolution/Framerate/Compression/Bitrate Type/Bitrate):
Specify video settings for each profile.
 Encoder
A. Device Information: Basic information of an encoder object.
 Name: Specify the name of encoder. The default name is model number.
 Location #1 ~ #4: Specify the location where the encoder is installed. According to a
whole system diagram, up to 4-depth location can be specified.
 Description: Input the relevant information on the encoder.
 Quantity: Display the number of cameras for group object.
B. IP Configuration: Network information of an encoder object.
 Address Type: Specify one of network address type.
 IP Address: Enter network IP address.
 Subnet Mask: Enter subnet mask address.
 Gateway: Enter network gateway address.
 DNS Server: Enter DNS server address.
C. Video Setup: Video profile setting of an encoder.
 Scene activity: Specify how complex scene and frequent movement the video has. If a