If you don’t choose any profile before registration device, system resister profile
no.2 for live monitoring automatically.
SSM
All of setting for SSM(Samsung Security Manager) system is implemented in SSM-Console.
A. Device Information: Basic information of a SSM object.
Name: Specify the name of SSM.
Location #1 ~ #4: Specify the location where the SSM is installed. According to a whole
system diagram, up to 4-depth location can be specified.
Description: Input the relevant information on the SSM.
B. SSM Configuration: Network information of a SSM object.
SSM Type: Displays which type of SSM the object is.
i. SSM-System Manager: It manages SSM Media Gateways. Up to 4 Media
Gateways are connectable.
ii. SSM-Media Gateway: It receives media data by directly connecting with camera,
NVR, and encoder.
iii. SSM-Console: It provides monitoring environment. It links to SSM System
Manager and views video through Media Gateway registering on the System
Manager.
iv. SSM-Standalone: Installing and using all the System Manager, Media Gateway,
and Console in a single PC.
Console Setup: Configurable when [SSM-Console] or [SSM-Standalone] selected.
Specify one of SSM System Manager physically connected. Select cameras, NVRs, and
encoders to be monitored from the list.
Media Gateway Setup: Configurable when [SSM-Media Gateway] or [SSM-Standalone]
selected. Select cameras, NVRs, and encoders from the list.
System Manager Setup: Configurable when [SSM-System Manager] or [SSM-Standalone]
selected. Select one of Media Gateway from the list.
C. IP Configuration: Network information of a SSM object.
Address Type: Specify one of network address type.
IP Address: Enter network IP address.
Subnet Mask: Enter subnet mask address.
Gateway: Enter network gateway address.
DNS Server: Enter DNS server address.
To Next Page
Loading...
