CMS
A. Device Information: Basic information of a CMS object.
Name: Specify the name of CMS.
Location #1 ~ #4: Specify the location where the CMS is installed. According to a whole
system diagram, up to 4-depth location can be specified.
Description: Input the relevant information on the CMS.
B. IP Configuration: Network information of a CMS object.
Address Type: Specify one of network address type.
IP Address: Enter network IP address.
Subnet Mask: Enter subnet mask address.
Gateway: Enter network gateway address.
DNS Server: Enter DNS server address.
C. Device Capabilities: Display maximum number of connectable devices for live monitoring.
D. Advanced Setup – CMS Device Configuration: Open the advanced setting window for CMS.
Device>Add Device: Resister selected devices for monitoring
Connectable Network Cameras/Encoders displays only the list of camera and
encoder which are physically connected to the CMS in your diagram.
CMS Live Channel>CMS Live Channels: Resister selected devices for live monitoring
Connectable Network Cameras/Encoders displays only the list of camera and
encoder which are physically connected to the CMS in your diagram.
You can select specific profile for live monitoring from each device.
To Next Page
Loading...
