Samsung IPX-S300B - Gateway Settings

Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться..
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться.
© SAMSUNG Electronics Co., Ltd.
page 112 of 162
Dial Plan
When dialing a phone number on the phone, if the number entered matches a specified rule,
the phone can be set to send a sent message immediately to IPX-S300B without waiting for
the next number or timeout. IPX-S300B can set dial plans to be used by phones and send
them to all phones.
Automatic Phone Update
IPX-S300B can automatically upgrade the phone software.
Load the package on a selected profile server and reboot the phone to have the phone
upgraded automatically.
During automatic upgrade (if the version information in sec_boot.xml is different from the
version on the phone), the phone software is automatically updated according to the
<upgrade_server> IP address and the protocol (tftp or http) defined in sec_boot.xml.
When the update is complete, sec_boot.xml is loaded again for the rest of the procedure.
In a large-scale IPX-S300B system, a separate profile server should be installed to reduce
load and upgrade time. (including sec_boot.xml)
The TFTP server and the upgrade server are included in IPX-S300B by default.
If necessary, you can have separate servers for these functions
9.9.3 Gateway Settings
IPX-S300B provides the survivable telephony support service, whereby, when an IP phone
is disconnected from IPX-S300B, the phone is connected to the gateway for minimum
PBX features. The survival feature really works by the gateway and the IP phone and not
by IPX-S300B. Generally, it is usually used not when there is a problem with IPX-S300B
but when the IP network between the IP phone and IPX-S300B experiences a trouble,
especially when the phone and IPX-S300B are in different locations.