Samsung IPX-S300B - Page 56

Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться..
Ошибка! Используйте вкладку "Главная" для применения 제목 1 к тексту, который должен здесь отображаться.
© SAMSUNG Electronics Co., Ltd.
page 56 of 162
The services involving override and privacy levels include the DND override feature
and the barge-in with/without tone feature.
 Service List
The administrator can assign privileges for Class of Service or individual users for use
of the services.
 Feature Codes
A user can use features in one of the following four ways:
 The administrator enables a feature for the individual user.
 The user enables a feature on IPX-S300B Personal Assistant.
 The user presses a feature button on the phone.
 The user dials a feature code from the phone.
If the user wishes to use a feature temporarily without having it configured in advance,
the user must use a feature button or a feature code.
Since IPX-S300B uses a standard protocol between phones and IPX-S300B, arbitrary
feature buttons cannot be created. Therefore IPX-S300B uses feature codes when
configuring features or when using features temporarily. If you press a feature button
on a Samsung phone, IPX-S300B is also designed to process the feature code assigned
to the feature button.
Feature codes can be configured for the following service types. When used in pairs-
such as for enable and disable, request and cancel, and login and logout-two feature
codes are registered.
 Feature Code + 1: Feature codes for enable, request, login, etc.
 Feature Code + 0: Feature codes for disable, cancel, logout, etc.