DCS Gateway Keyset User Guide
— 37 —
• Dial the extension or trunk number, or dial 1 and then the
orbit number, on which the call has been parked.
You will be connected to the parked call.
If the parked call is not answered within a pre-programmed
period of time, it will recall your keyset and have a slow
flashing green light.
Setting a Message Indication
To leave a message at another station or station group if no-
one answers or you receive busy tone:
• Press the
MESSAGE
key, or press the
TRSF
key and dial
*41.
If you have no
MESSAGE
key assigned, use the soft keys to
select the MSG menu.
• When you receive confirmation tone, hang up.
(The message key on the called extension or on all of the ex-
tensions in the group will flash. Standard or SLT telephones
receive a special dial tone as a message indication.)
Cancelling Messages
To cancel a message indication that you left at another exten-
sion:
• Dial #43 plus the extension number at which you left a
message indication, or press the
MESSAGE
key and then
the
CLEAR
key.
To cancel all message indications left at your keyset:
• Dial #42 plus your extension. Your
MESSAGE
key light
will turn off.
To Next Page
Loading...
