DCS Gateway Keyset User Guide
— 46 —
Display Features
Directory Information
A name (up to 16-characters long) can be assigned to each ex-
tension number. Display keysets can view the name of the call-
ing extension before answering. The display will show:
CALL FR XXXX where XXXX is the calling extension
no.
NAME the calling extension’s name
Each outside line (including direct dial inward lines) can have
a name. Incoming calls can be easily identified and answered
with different greetings.
Enter Extension Name
You can enter your own name or another extension user’s
name.
■
■■
■ To enter your own name:
• Press the
STN NAME
key.
• Press the right soft key.
• Enter your name, up to 16 characters, using the dial key-
pad. (See the table at the start of the Dialling Features sec-
tion for details.)
• Press the
STN NAME
key or right soft key, then the
SPEAKER
key.
■
■■
■ To enter another extension user’s name:
• Press the
STN NAME
key.
• Press the extension number for the phone on which you
want to display the name.
• Enter the name, up to a maximum 16 characters. (See the
To Next Page
