Changing Booting Priority
You can select the booting priority among the devices such as the hard
drive, CD-ROM drive, etc. The following example describes how to con-
figure the hard drive as the first booting device when the CD-ROM drive
is configured as the first booting device by default.
1. Select the Boot Menu in System Setup.
2. Press <Enter> on Boot Device Priority item.
3. Use the <↓> key to move to the Hard Drive item, and press <F6> key until it
is at the very top.
4. Press <F10> to save the changed configuration, and exit System Setup.
Now you can boot the system with the hard disk drive as the first booting device.
6-6
Manual
Boot Options
DVD/CD-ROM Drive
Removable Devices
+ Hard Drive
Select system boot
options
Boot Device Priority
Core Milti-Processing [Enabled]
NumLock [Off]
Enable Keypad [By NumLock]
Summary screen [Disabled]
Boot-time Diagnostic Screen [Disabled]
PXE OPROM [Only with F12]
Brightness Mode Control [Auto]
Smart Battery Calibration
▶
m55-hk_ch6 2006.2.7 9:10 AM 페이지6 1000 Dolev-1524-Mono-S T
To Next Page
Loading...
