Disassembly and Reassembly
65Samsung Electronics
No Parts Procedure Remark
3 Control In
1) Loosen the fixing screw, detach
the Cover-Control.
2) Detach the Motor-Fan in and Sensor
Connector connected to PCB.
3) Loosen 2 fixing screws.(arrow mark)
4) Hold the Ass'y Control In by hand to lift up
a little and then release the status of
hanging on the hanging slot.
DB98_20402A(1)_1 10/26/04 2:55 PM Page 65
To Next Page
Loading...
