Feature & Operation
77Samsung Electronics
6-1-6 Energy saving operation control
●
In case of Cooling Only model
●
The Energy saving mode is applicable to only in both the COOL mode and AUTO mode.
●
In case of Heat Pump model
●
The Energy saving mode is applicable to only in the COOL mode.
◆ Energy saving operation specification
- If you select the Energy saving mode during automatic operation, the setting temperature(Ts) will be fixed to "the standard
value +2°C"(26°C).
- If you select the Energy saving mode during cooling operation, you may set the room temperature from "26°C to 30°C",
but if you hope to control the room temperature below 26°C in the Energy saving mode, the room temperature will be com-
pelled to be 26°C.
- If you select the Energy saving mode, the up/down louver will enter the "Swing" status.
- OPERATION PATTERN A : In the Energy saving mode when Room Temperature(Tr) equals to the Setting Temperature(Ts) or over.
- OPERATION PATTERN B : In the Energy saving mode when Room Temperature(Tr) is below the Setting Temperature(Ts).
Tg +ß
Tg
Temperature
Energy saving
mode
General operation mode
Energy saving mode starting
→
Ts+1
Ts
OFFON
Time
COMP_or
Tg +ß
Tg +ß
Tg
Tg←Tg+α
Tg←Tg+α
Temperature
Energy saving
mode
General operation
mode
Energy saving
mode starting
Energy saving
pattern mode B
Change the Energy saving
pattern A.
→
→
Energy saving Ts+1
Energy saving Ts
Tr
Ts
OFF
ON
Time
COMP_or
DB98_20402A(1)_1 10/26/04 2:58 PM Page 77
To Next Page
Loading...
