Disassembly and Reassembly
4-15Samsung Electronics
No Parts Procedure Remark
4 Evaporator
✳ After finished the procedures above,
detach the Evaporator.
1) After disassembling 2 indicating screws,
detach Ass'y Cover Pipe.
(Use +Screw Driver.)
2) Detach the Sensor from the
Control Box.(including 2 Sensors)
3) After disassembling 2 indicating screws,
detach Ass'y Support Evap LF.
(Use +Screw Driver.)
4) After disassembling 2 indicating screws,
detach Ass'y Support Evap RH.
(Use +Screw Driver.)
To Next Page
Loading...
