Disassembly and Reassembly
Samsung Electronics4-16
No Parts Procedure Remark
5
Control In
5) Detach the Evaporator from the set.
✳ Detach the parts of Control In after
disassembling the Cover Control.
1) Detach all the wires connected to the
PCB.
2) If only the disassembly of PCB required,
press the Pothook and detach the PCB
from the set.
3) If only the disassembly of Capacitor is
required, detach it from the set.
4) If only the disassembly of Case Control is
required, detach it from the set after
disassembling 2 indicating screws.
(Use +Screw Driver.)
To Next Page
Loading...
