16
Connecting network
4
5
6
4. Select the wireless router that you are using now.
- When using free wireless router, refer to the corresponding user manual for password.
5. After entering the password of selected wireless router, press the [OK] tab.
- When the password has not been set, press the [OK] tab without entering the password.
6. When 'Transfer complete' pop up comes on, press the [OK] tab.
- When the air conditioner is connected with wireless router correctly, the second LED of Wi-Fi kit ( ) will be On.
- After connecting the wireless router with the air conditioner and when the second LED of Wi-Fi kit ( ) blinks, check
the internet connection status.
7. After 2minutes, if the Wi-Fi LED of the air conditioner is still on, it means the configuration has succeeded. At this point,
you can use smart phone to control the system.
• When searching a network by pressing 'AP' button, third LED ( ) will be on for a maximum of 5 minutes.
• Smart A/C application is optimized with Samsung smart phones. Supported models are; Galaxy S, Galaxy S2, Galaxy
Note, Galaxy S2 HD LTE, Galaxy Tab 7.0 and Galaxy tab 10.1 and other models can be added in the future. When the
Smart A/C application is used with other smart phones, some functions may not work.
NOTE
CAC WiFi Kit APP_03384A(1).indd 16 2012-10-12 오후 3:37:13
To Next Page
Loading...
