Samsung MIM-H02 - The Procedure of Setting Option

10
How to install Wi-Fi kit
The procedure of setting option
Operation Indication
* Step 1
1. Remove the batteries from the remote controller.
2. Insert batteries while pressing High Temp Button and Low Temp Button.
* Step 2
1. Press LowFan Button to enter SEG2 value.
2. Press High Fan Button to enter SEG3 value.
* Step 3
PressModeButtontobechangetoCoolmodeintheONstatus.
1. Press Low Fan Button to enter SEG4 value.
2. Press High Fan Button to enter SEG5 value.
* Step 4
PressModeButtontobechangedtoDRYmodeintheONstatus.
1. Press Low Fan Button to enter SEG6.
2.PressHighFanButtontoenterSEG8.
* Step 5
PressModeButtontobechangedtoFANmodeintheONstatus.
1.PressLowFanButtontoenterSEG9value.
2.PressHighFanButtontoenterSEG10value.
* Step 6
PressModeButtontobechangedtoHEATmodeintheONstatus.
1. Press Low Fan Button to enter SEG11 value.
2. Press High Fan Button to enter SEG12value
*Step7
Press Mode Button to be changed to AUTO mode in the OFF status.
1. Press Fan button to enter SEG14 value.
2. Press High Fan Button to enter SEG15 value.
*Step8
Press Mode Button to be changed to Cool mode in the OFF status.
1. Press Low Fan Button to enter SEG16 value.
2.PressHighFanButtontoenterSEG17value.
*Step9
Press Mode Button to be changed to DRY mode in the OFF status.
1.PressLowFanButtontoenterSEG18value.
2.PressHighFanButtontoenterSEG20value.
*Step10
PressModeButtontobechangedtoFANmodeinOFFstatus
1. Press Low Fan Button to enter SEG21 value.
2. Press High Fan Button to enter SEG22 value.
*Step10
Press Mode button to be changed to HEAT mode in the OFF status
1. Press Low Fan Button to enter SEG23 value.
2. Press High Fan Button to enter SEG24 value.
* Step 11
Press operation button to enter option.
CAC WiFi Kit APP_03384A(1).indd 10 2012-10-12 오후 3:37:12