18
Connecting network
6
7
8
6. Press the [Setting Start] tab.
7. Enter the information of wireless router and press the [OK] tab.
- Required information is; SSID, Security type, Encryption type and Password.
• If you do not know the information of wireless router, check its manual or contact your ISP (internet service
provider).
8. When 'Transfer complete' pop up comes on, press the [OK] tab.
9. Select [Settings] [Wi-Fi] on your iPhone.
10. Select the wireless router that you are using, and enter the password.
- When the air conditioner is connected with wireless router correctly, the second LED of Wi-Fi kit ( ) will be On.
- After connecting the wireless router with the air conditioner and when the second LED of Wi-Fi kit ( ) blinks, check
the internet connection status.
11. After 2 minutes, if the Wi-Fi LED of the air conditioner is still on, it means the configuration has succeeded. At this point,
you can use smart phone to control the system.
• When searching a network by pressing 'AP' button, third LED ( ) will be on for a maximum of 5 minutes.
• Supported models are; iphone4, iphone4S. and other models can be added in the future.
NOTE
NOTE
CAC WiFi Kit APP_03384A(1).indd 18 2012-10-12 오후 3:37:14
To Next Page
Loading...
