Samsung MIM-H04EN - Starting the system air conditioner app; Controlling the air conditioner

20
Starting the system air conditioner app
Controlling the air conditioner
Below are functions that you can control or monitor using the Wi-Fi adapter.
Category Function Description
Monitoring
Desired Temp Displays the desired temperature.
Current Temp Displays the current temperature.
Filter warning ɇʪθϩϑ˝ʪʪθɇϩʪʒɇ˙ϩʪθϩ˵ʪѣϩʪθϩʪʪɇΧϑʪϑࢋ
Defrost Appears in the defrost state.
Energy monitor Displays the power usage on the daily/weekly/monthly basis.
Control
Power supply Turn on or off the air conditioner.
Operation mode Select the desired operation mode.
Temperature control Adjust the desired temperature.
Fan speed Adjust the desired fan speed.
θѤͱиʒθʪʀϩͱ ʒЇϑϩϩ˵ʪʒʪϑθʪʒɇθѤͱиʒθʪʀϩͱࢋ
Wind-Free Enables/disables the Wind-Free function.
Long Enables/disables the Long function.
Clean Enables/disables the Clean function.
Motion detection Enables/disables the motion detection function.
Direct/indirect wind
Select any of direct wind and indirect wind while in motion
detection.
Ionizer Enables/disables the Ionizer function.
Reset Filter ƸΧͱɇѣϩʪθɇʪθϩࡡцͱЇʀɇϩɇіʪϩ˵ʪѣϩʪθθʪϑʪϩϩʪࢋ
Ǥʪϩɇϩͱ kɇɵʪϑࢥʒϑɇɵʪϑϩ˵ʪǤʪϩɇϩͱࢋ
Hot water Enables/disables the Hot water function.
• Available features may differ depending on the model.
• Ɗͱʪ˙ʪɇϩЇθʪϑɇцͱϩɵʪɇЭɇɇɵʪɇʀʀͱθʒ˝ϩͱϩ˵ʪϑΧʪʀѣʀɇϩͱϑͱ˙ϩ˵ʪʒͱͱθЇϩࢋ
• For more information about the SmartThings app, details can be found in SmartThings app.
NOTE
ki]_TW_[Y]hTW[piptuhzhGvjmG~TmGrl|luUGGGYW YWYYTXXTYZGGG㝘㤸GXXaWWaZ]