6
Installing the Wi-Fi Kit
Wi-Fi Kit installation
• To ensure smooth operation, there should be no obstacle between the Wi-Fi Kit and wireless router
that may interfere with communication. When the Wi-Fi Kit is too far from a router or there are
potentially interfering elements between them, it may cause problems with the performance of the
Wi-Fi Kit that cannot be resolved by customer services.
• ťɇʀʪϩ˵ʪǮࣗçϩɇɇθʪɇи˵ʪθʪцͱЇʀɇʪɇϑцΧθʪϑϑϩ˵ʪťɵЇϩϩͱ˙ͱθʒʪЭʀʪЭʪθѣʀɇϩͱࢋ
• Do not install the Wi-Fi Kit in an area where it may be exposed to moisture or impact.
• ĮΧʪθɇϩ˝ϩʪΧʪθɇϩЇθʪࡠߡࣗߥߡঐࡡĮΧʪθɇϩ˝˵Їʒϩцࡠߤߡࣗߪߡ࣍θʪɇϩЭʪ࣎
1. ƸϑʪɇѤɇϩ˵ʪɇʒϑʀθʪиʒθЭʪθϩͱϩЇθʪɇʀ˵ͱ˙ϩ˵ʪϑαЇɇθʪ˵ͱʪϑɇϩϩ˵ʪͱиʪθΧɇθϩͱ˙ϩ˵ʪǮࣗçϩɇʒθʪͱЭʪ
the back cover.
࢘
Push both latches at the same time.
• ƸϑʪɇѤɇϩ˵ʪɇʒϑʀθʪиʒθЭʪθϩͱϩЇθϩ˵ʪθʪʀϩɇ˝Їɇθ˵ͱʪɇϩϩ˵ʪЇΧΧʪθ
Χɇθϩͱ˙ϩ˵ʪѣу˝˵ͱͱ˙ͱθʪɇϑцθʪͱЭɇࢋ
2. Arrange the power and communication cables along the back cover.
15 cm
<Wires installed on the wall> <Wires installed in the wall>
10 cm
If necessary, remove
this part to secure
more space for wiring.
CAUTION
NOTE
ki]_TW_[Y]hTW[piptuhzhGvjmG~TmGrl|luUGGG] YWYYTXXTYZGGG㝘㤸GXXaWWaZY