EasyManua.ls Logo

Samsung MIM-H04EN - Setting the indoor unit tenants for each user

Samsung MIM-H04EN
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Installing the Wi-Fi Kit
6. Activate the Wi-Fi Kit.
When power is supplied, all indicators on the Wi-Fi Kit illuminate until the system boots completely.
After the system operates, tracking is performed automatically.
7. T r a cki ng
Tracking:
The Wi-Fi Kit detects connected indoor unit(s) and the indoor unit(s) detects the connection to the
Wi-Fi Kit. Tracking is required to monitor or control the system air conditioner using the Wi-Fi Kit.
The Wi-Fi Kit automatically performs tracking when activated. The ( ) ( ) indicators on the Wi-Fi Kit
blink while in tracking.
When any change in the installation of indoor and outdoor units occurs, manually run the tracking by
pressing the (SW3,
Ķ- ) button inside the Wi-Fi Kit.
To control indoor units by using a mobile phone, wait until the tracking is completed and then connect
the Wi-Fi Kit to a wireless router.
The (AP) indicator does not turn off until the Wi-Fi Kit is connected to a wireless router after tracking.
Setting the indoor unit tenants for each user
The multi-tenants feature allows you to control and monitor the indoor units with the group channel
address (RMC1) that is the same as that of the Wi-Fi Kit.
In order to selectively use the indoor units connected to a single outdoor unit by multiple users,
you can install multiple Wi-Fi Kits and group the indoor units by setting the group channel address (RMC1) for each Wi-Fi Kit.
S-NET pro 2
Setting the group channel
address (indoor unit) and
tenant address (Wi-Fi Kit)
Tenant address 1
Hair salon Café Grocery store
Tenant address 2 Tenant address 3
Group channel address 1 2 3
1. Install a separate Wi-Fi kit for each group. Example: if you have 3 separate groups/tenants, you must
install 3 Wi-Fi kits.
You can connect up to 16 Wi-Fi Kits to a single outdoor unit.
When installing multiple Wi-Fi Kits, connect and perform tracking one by one.
࣍ͱθʪуɇΧʪࡡʀͱʪʀϩɇʒΧʪθ˙ͱθϩθɇʀ˝ͱǮࣗçϩࢄߢʀͱʪʀϩɇʒΧʪθ˙ͱθϩθɇʀ˝ͱǮࣗ
çϩࢄߣࢋࢋࢋʀͱʪʀϩɇʒΧʪθ˙ͱθϩθɇʀ˝ͱǮࣗçϩࢄߢߧࢋ࣎
If you connect multiple Wi-Fi Kits and perform tracking on them at the same time, you will not get
reliable results.
NOTE
NOTE
CAUTION
ki]_TW_[Y]hTW[piptuhzhGvjmG~TmGrl|luUGGGXY YWYYTXXTYZGGG㝘㤸GXXaWWaZ\

Related product manuals