Samsung ML-1210 - Basic Printing; Understanding the Control Panel

Disassembly and Reassembly
3-6
Samsung Electronics
3-9 SMPS Board
1. Before you remove the SMPS board, you should
remove:
• Main Cover (see [3-1 Main Cover])
2. Remove screws in the order of then remove
the shield engine assembly.
3. Unplug connectors from the main board and connec-
tors from SMPS, then remove the SMPS. Remove
four screws from SMPS and remove the SMPS
board.
Note
The Engine board and SMPS board are
integrated in a body.
a
b
a
b