S
ETTING
U
P
Y
OUR
P
RINTER
2.9
6
If necessary, close the paper cover to keep the paper
loaded in the tray from dust.
Connecting a Printer Cable
To print from your computer in a local environment, you need to
connect your printer to the computer with either a parallel interface
cable or a Universal Serial Bus (USB) cable.
If you are a Macintosh user, you can use only the USB cable.
N
OTE
: You only need to connect one of the cables mentioned above.
Do not use the parallel cable and USB cables at the same time.
Using a Parallel Cable
N
OTE
: Connecting the printer to the parallel port of the computer
requires a certified parallel cable. You will need to buy a IEEE1284
compliant cable that is 3 m or less in length.
1
Make sure that both the printer and the computer are turned off.
2
Connect a parallel printer cable into the parallel port on the back of
the printer.
Push the metal clips down to fit inside the notches on the cable
plug.
To Next Page
Loading...
