IPv6 configuration
26
2. Using a network-connected machine
12
Using SyncThru™ Web Service
1
Start a web browser, such as Internet Explorer, that supports
IPv6 addressing as a URL.
2
Select one of the IPv6 addresses (Link-local Address,
Stateless Address, Stateful Address, Manual Address) from
Network Configuration Report (see "Printing a network
configuration report" on page 13).
3
Enter the IPv6 addresses (e.g.,: http://
[FE80::215:99FF:FE66:7701]).
Address must be enclosed in '[ ]' brackets.
To Next Page
Loading...
Need help?
General