Samsung ML-331xD - 4.1 Alignment and Adjustments

4. Alignment and Troubleshooting
4-1
Samsung Electronics
Service Manual
ML-331x/371x series
4.1 Alignment and Adjustments
This chapter describes the main functions for service, such as the product maintenance method, the test
output related to maintenance and repair, Jam removing method, and so on.
It includes the contents of manual.
4.1.1 Control Panel
■ Type A
4. Alignment and Troubleshooting
1 Eco Enters eco printing mode to reduce toner consumption and paper usage.
2
(Cancel)
Stops an operation at any time and there are more functions.
• Printing demo page : Press and hold this button for about 5 seconds until
the status LED blinks slowly, and release.
• Printing con guration sheets : Press and hold this button for about 3
seconds until the status LED blinks quickly, and release.
3
(Power) You can turn the power on and off with this button.
4
G
(Jam LED) Shows the status of jam occurance of your machine.
5
G
(Status LED) Shows the status of your machine.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA