4. Alignment and Troubleshooting
Service Manual
ML-331x/371x series
4-8
Samsung Electronics
In the duplex unit area
1. Pull the duplex unit out of the machine.
2. Remove the jammed paper from the duplex unit.
If the paper does not come out with the duplex
unit, remove the paper from the bottom of the
machine.
Insert the duplex unit into the machine.
If you still do not see the paper, go to the next
step.
3. Open the rear cover.
4. Remove the jammed paper as shown in the
following gure.
5. Return the fuser door and the lever to their
original position.
6. Close the rear cover. Printing automatically
resumes.
Z
Z
X
1 fuser door
To Next Page
Loading...
