Disassembly and Reassembly
Samsung Electronics
Service Manual
3-15
3.11 Drive Ass'y
1. Before you remove the Drive Ass'y, you should
remove:
- Side Cover Left (Refer to 3.9)
2. Remove the six screws securing the Drive Ass'y
and remove it.
Notice : The six screws have numbers stamped into
the Drive Ass'y base plate. When refitting the
Drive Ass'y tighten the screws the order they
are numbered. Only screws numbered 1 to 5
are fitted at this stage. Screw 6 is fitted when
the Shield Controller Ass'y is refitted.
3. If necessary, remove the four screws securing the
BLDC Motor Ass'y and remove it.
To Next Page
Loading...
