Disassembly and Reassembly
Samsung Electronics
Service Manual
3-25
3.22 Feed Roller Parts
1. Before you remove the Feed Roller Parts, you
should remove:
- Pick Up Roller Ass'y (Refer to 3.17)
- Duplex Guide Housing (Refer to 3.18)
- Cover Mid Front (Refer to 3.20)
- MPF Housing (Refer to 3.21)
2. Remove the two screws securing the both side of
the Guide Paper and then remove the Guides.
3. Pull up the Feed Idle Shaft and the Bushs (with
Spring).
4. Release the E-Ring securing the Feed2 Gear and
remove it.
5. Remove the three screws securing the Feed
Bracket Unit and then remove the Feed Bracket
Unit and Feed2 Shaft.
To Next Page
Loading...
