Troubleshooting
Service Manual
6-22
Samsung Electronics
6.5.3 Replacing the toner cartridge
When the toner cartridge is completely empty:
• Replace Toner appears on the display.
• The Smart Panel program window appears on the computer telling you that the toner cartridge is empty.
• The Status LED lights red.
At this stage, the toner cartridge needs to be replaced. For order information for toner cartridges,
Note : This feature does not work for the Toner Empty message.
1. Open the top cover.
2. Pull the toner cartridge out.
3. Remove the new toner cartridge from its bag.
Caution : Do not use sharp objects, such as a knife or
scissors, to open the toner cartridge package.
They might scratch the drum of the cartridge.
4. Locate the sealing tape at the end of the toner
cartridge. Carefully pull the tape completely out of the
cartridge and discard it.
Note : • The sealing tape should be longer than 60 cm
when correctly removed.
• Holding the toner cartridge, pull the sealing tape
straight to remove it form the cartridge. Be care-
ful not to cut the tape. If this happens, you can-
not use the toner cartridge.
• Refer to the helpful pictures on the cartridge
wrapping paper.
5. Remove the flexible plastic holder out of the toner
cartridge.
To Next Page
Loading...
