Service Manual
Disassembly and Reassembly
5-4
Samsung Electronics
5.4 Holder Pad Ass'y
1. Before you remove the Holder Pad Ass'y, you should
remove : -MPFAss'y (Refer to the5.3)
2. Unplug the connector and remove the three screws,
as shown below.
3. Remove the Photo Interrupter and the MP Actuator,
as shown below.
Holder Pad Ass’y
Friction Pad
MP Actuator
5. Remove MP Cover in the direction of arrow, as shown
below.
* NOTICE : Do not separate the spring from the MP Pick Up
Rack for convenience of assembling. Locate the hook sec-
tion of the spring that is connected to the Knock Up Plate
Ass'y as shown in the outside for convenience of assembling.
To Next Page
Loading...
