Samsung MR-EC00 - Using the Purity Function

ENGLISH-18
Using the Purity function
Purity function will remove harmful materials in the air to provide you clean and healthy environment.
You can select this function additionally while the air conditioner is in operation.
When the air conditioner is turned on
Remote controller display
1. Press the Options button.
2. Press the <, > or Options button until ( ) indicator starts to blink.
3. Press the SET button to set the Purity function.
- ( )  ( ) indicator will be displayed on the remote controller display and
Virus Doctor function will begin.
Cancel
 Press the Options button  press the <, > or Options button to
make the ( ) indicator blink and press the SET button.
• You may select the purity function additionally during Auto/Cool/Dry/
Heat mode and you can adjust the temperature.
 Heat mode operates with MR-EH00/MR-EH00U model only.
• If the purity function is selected additionally in fan mode, the temperature
cannot be adjusted.
• When the air conditioner and the purity function are turned on
simultaneously and you press the Power button, both air conditioner and
purity function will stop operation.
• You can still use the purity function when the On timer is set with the air
conditioner is turned off.
• There will not be much difference on energy consumption and operating
noise when the purity function is selected additionally while the air
conditioner is turned on.
NOTE
When the air conditioner is turned o
Remote controller display
1. Press the Options button.
2. Press the SET button when ( ) indicator blinks to begin purity function.
- ( )  ( ) indicator will be displayed on the remote controller display and
Virus doctor function will begin.
Cancel
 Press the Options button to make the ( ) indicator blink and press
the SET button.
MR-EH00_IB_04667A-01_EN.indd 18 2014-12-04 오전 10:29:08