ENGLISH-20
Selecting an indoor unit
You can select and operate individual indoor units out of 4 indoor units.
When the air conditioner is turned on
Remote controller display
1. Press the Settings button.
2. Press the <, > or Settings button until (Zone) indicator starts to blink.
3. Press the SET button to select the indoor unit you want to operate.
- You can select individual units in order (1~4) or select all indoor units at one time.
Selecting a blade
You can select and operate individual blades out of 4 blades.
When the air conditioner is turned on
Remote controller display
1. Press the button.
- Blade 1234 will be displayed.
2. Press the Settings button.
3. Press the <, > or Settings button until (Blade) indicator starts to blink.
4. Press the SET button to select the blade you want to operate.
- You can select the individual blades in order (1~4) or select all blades at one time.
• To cancel the selected blade, press the button.
• When selecting the blade individually,
button will not work.
NOTE
To Next Page
Loading...
