ENGLISH-19
04 OPTIONS
Using the Quiet function
You can reduce the noise generated from the indoor unit during Cool/Heat mode.
When the air conditioner is operating in Cool or Heat mode;
Remote controller display
1. Press the Options button.
2. Press the <, > or Options button until (Quiet) indicator starts to blink.
3. Press the SET button to set the Quiet function.
- (Quiet) (Quiet) indicator will be displayed on the remote controller display and
Quiet function will begin.
Cancel
Press the Options button press the <, > or Options button to
make the (Quiet) indicator blink and press the SET button.
Additional options available in Quiet function
In Cool mode
Temperature can be adjusted by 1°C(1°F) within the range of
18°C(65°F) ~ 30°C(86°F).
In Heat mode
Temperature can be adjusted by 1°C(1°F) within the range of
16°C(61°F) ~30°C(86°F).
Heat mode operates with MR-EH00/MR-EH00U model only.
Fan speed is set to (Auto).
Air flow direction can be adjusted.
• Quiet function can be set only in Cool/Heat mode and if the Quiet
function is selected while Turbo function is on, the Turbo function will be
cancelled.
Heat mode operates with MR-EH00/MR-EH00U model only.
NOTE
MR-EH00_IB_04667A-01_EN.indd 19 2014-12-04 오전 10:29:09
To Next Page
Loading...
