4. Troubleshooting
NO
YES
NO
NO
YES
“E-33, E-34 or E-35” is displayed.
Perform the operation again and check if it
is working properly.
The sensor is out of order.
Does the roller turn
and press against the
weight sensor?
Is the weight sensor
contaminated by any foreign
substance?
Replace the sensor.
: Check if the turntable turns abnormally
because food is placed on one side
only, or if it turns irregularly,
or if it is slanted and the
weight sensor is not pressed.
Place the turntable over
the roller properly.
YES
Remove the foreign
substance.
Place the food
in the center.
Has the turntable
been placed over the roller
properly?
To Next Page
Loading...
