10
3. Disassembly and Reassembly
Parts Explaination Photo Explaination
Magnetron,
Motor Assembly
and Lamp
8. Remove the oven lamp from
hole of air cover.
NOTE1: When removing the magnetron, make sure that its antenna does not hit any adjacent parts, or it may be
damaged.
NOTE2:
When replacing the magnetron, be sure to remount the magnetron gasket in the correct position and
make sure the gasket is in good condition.
3-2 Replacement of High Voltage Trancefomer
Parts Explaination Photo Explaination
High Voltage
Transformer
1. Discharge the high voltage
capacitor.
2. Disconnect all the leads.
3-1 Disassembly of Magnetron, Motor Assembly and Lamp
To Next Page
Loading...
