English 29
04 Basic Functions
Press 8. the ENTER (
) button.
Result: CHK REC (Do you want to record?) is displayed.
Press 9. the ENTER (
) button.
Result: REC N is displayed, you can press the
_ or +
button to select the REC Y or REC N, and then press
ENTER button.
If you select the REC N, it will 1). cancel tuner timing
recording even if you have already set the tuner
timing recording.
If you select the REC Y, you can set the2). tuner timing
recording.
Press
a.
the ENTER (
) button.
Result: ON is displayed for a few seconds, you
can set the tuner timing recording switch-on time.
Press
b.
the ENTER (
) button.
Result: OFF is displayed for a few seconds, you
can set the tuner timing recording switch-off time.
NOTE ✎
The maximal tuner timing recording time is 5 hours.
`
If the timer switch on and off times are identical, the
`
word ERROR is displayed.
`
If there is no disc or usb, when you select the “DVD/CD,
USB, it will automatically change to “TUNER”.
`
If the switch-on or -off time is the same as the timing
recording time, only the switch-on or -off time is
effective, and the timing recording time is not applied
.
Cancelling the Timer
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you can cancel it.
To cancel the timer, press and hold TIMER ON/1.
OFF once.
Result: is no longer displayed.
To resume the timer, press and hold TIMER ON/2.
OFF again.
Result: is displayed again.
Sleep Timer Function
You can set the time that the DVD player will shut
itself off.
Press and hold 1. SLEEP button:
Result:
`
The playback starts and the following
indications are displayed: 90MIN
Press and hold the SLEEP button once or more 2.
times to indicate how long the system should
continue playing before it switches off:
90MIN
60MIN
45MIN
30MIN
15MIN
SLPOFF
At any time, you can:
check the remaining time by pressing and holding the `
SLEEP button.
Change the remaining time by repeating steps 1 `
and 2.
To cancel the sleep timer, press and hold 3. SLEEP
button until SLPOFF appears on the display.
To Next Page
Loading...
