40
Using "PCoIP"
2
2 Using "PCoIP"
Discovery Tab
Use the settings on the Discovery page to erase the discovery of hosts and clients in your PCoIP system
and dramatically reduce the configuration and maintenance effort for complex systems. This discovery
mechanism is independent of DNS SRV discovery.
For SLP discovery to work, routers must be configured to forward multicast traffic between subnets.
DNS-SRV Discovery is the recommended discovery mechanism because most deployments do not
allow this.
Figure 2-6: Discovery Configuration
Enable Discovery
If the Enable Discovery option is enabled, the device will dynamically discover peer devices using
SLP Discovery without requiring prior information on their locations in the network.
This can dramatically reduce configuration and maintenance effort for complex systems.
SLP discovery requires routers configured to allow multicast. DNS-SRV Discovery is the
recommended method.
To Next Page
Loading...
