Samsung NE58F9710WS/AA

Questions and Answers

E
erin35Sep 23, 2025
What to do if Samsung NE58F9710WS/AA displays error E-0E?
- L
  leslieburkeSep 23, 2025
  If your Samsung Ranges shows an E-0E error, it indicates a door locking problem. Here's how to address it: 1. Disconnect the power and open the back cover to check the harness connection to the door lock switch and motor. 2. Make sure the resistance value of the door lock motor is within the normal range. 3. When operating the door lockout, measure the voltage of the connector on the harness linked to the door lock motor. The normal voltage should be AC 120V. 4. Verify that the door locking switch is functioning correctly.
A
Alexander WeissAug 25, 2025
What to do if my Samsung Ranges oven will not turn on?
- E
  Edward PorterAug 25, 2025
  If your Samsung Ranges oven isn't turning on, ensure the range is fully plugged into a working, grounded electrical outlet. Check your home's fuse box or circuit breaker and replace any blown fuses or reset tripped breakers. Also, verify that the oven controls are properly set. Finally, if the oven is too hot, allow it to cool down before attempting to turn it on.
N
Nicholas DixonAug 25, 2025
Why does the display go blank on my Samsung Ranges?
- B
  Bryan BeasleyAug 26, 2025
  If the display on your Samsung Ranges goes blank, a fuse in your home may be blown, or the circuit breaker may have tripped. Replace the fuse or reset the circuit breaker.
A
angelakellerAug 27, 2025
What to do if my Samsung NE58F9710WS/AA Ranges oven control beeps and displays an error code?
- S
  Shannon GarciaAug 27, 2025
  If your Samsung Ranges oven control is beeping and displaying an error code, press Oven Off and restart the oven. If the issue continues, disconnect the power to the range for at least 30 seconds, then reconnect it. If the problem persists after this, call for service.
K
kpetersAug 27, 2025
Why Samsung Ranges surface units will not maintain a rolling boil?
- M
  Michelle JonesAug 27, 2025
  If the surface units on your Samsung Ranges aren't maintaining a rolling boil or cooking food fast enough, make sure you're using flat pans that match the diameter of the surface unit. If the power (voltage) in your area is low, cover the pan with a lid to help retain heat until the desired temperature is reached.
J
Jacqueline MerrittSep 13, 2025
How to clean areas of discoloration with metallic sheen on Samsung Ranges?
- G
  gravesjosephSep 13, 2025
  If you see areas of discoloration with a metallic sheen on your Samsung Ranges cooktop, it's likely due to mineral deposits from water and food left on the surface. Remove these deposits using a ceramic-glass cooktop cleaning cream. Also, ensure you're using cookware with clean, dry bottoms.
J
Jessica KnappSep 12, 2025
How to remove brown streaks or specks from Samsung NE58F9710WS/AA?
- R
  Rebecca JohnsonSep 12, 2025
  If you notice brown streaks or specks on your Samsung Ranges cooktop, it's likely due to boil-overs that have been cooked onto the surface. Use a blade scraper to remove the soil. You can also refer to the section on care and cleaning of the glass cooktop.
L
Leslie StoutSep 12, 2025
What to do if my Samsung Ranges cannot be moved easily for servicing?
- M
  millersamanthaSep 12, 2025
  If your Samsung Ranges must be accessed for servicing but cannot be moved easily, it might be because the kitchen cabinets are not square or built too tightly around the appliance. In this case, contact a builder or installer to make the appliance accessible. Alternatively, carpet interfering with the range's movement might be the issue; ensure there is enough space to lift the range over the carpet.
C
Carol WashingtonSep 4, 2025
Why does my Samsung NE58F9710WS/AA oven smoke excessively during broiling?
- R
  Robert WardSep 4, 2025
  If your Samsung Ranges oven smokes excessively during broiling, ensure the control is set correctly and the oven door is opened to the broil stop position. Also, reposition the rack to provide enough space between the meat and the element, preheating the broil element for searing. Remove excess fat from the meat, and trim fatty edges. Regular cleaning is necessary to prevent grease buildup on oven surfaces.
Y
youngjamieSep 2, 2025
Why does the display flash on my Samsung Ranges?
- T
  Trevor StoneSep 2, 2025
  If the display on your Samsung Ranges flashes, it indicates there was a power failure. Reset the clock to resolve the issue.

Samsung NE58F9710WS/AA Specifications

General

Style	single oven, slide-in
Color	stainless steel
Total Capacity	5.8 cubic feet
Options	delay bake option, time bake, timer, variable broil
Cooking Programs	convection, bake, roast, broil
Convection	multi-fan
Induction	no
Number of Burners / Elements	5
Number of Oven Racks	3
Number of Oven Rack Positions	7
Control Type	knob, touchscreen
Interior Light	yes
Child Lock	yes
Smart Home	no
Fuel	electric
Voltage	240 volts
Current	40 amperes