Samsung note 2 - Pairing Bluetooth Devices

49
DEVICE FUNCTIONS
To turn Bluetooth off:
1. From the Home screen, press (Menu)
and then tap Settings.
2. In a single motion touch and slide the
Bluetooth slider to the left
OFF
to turn
it off.
Pairing Bluetooth Devices
1. Verify Bluetooth is active.
2. From the Bluetooth settings page, tap the
Visibility field (shown by the device name).
Your device must be visible to successfully pair
with an external device. This is shown by a
green check mark.
3. Tap Scan. Your device displays a list of
discovered in-range Bluetooth devices.
4. Tap a device from the list to initiate pairing.
5. Enter the passkey or PIN code, if needed, and
tap OK.
6. The external device must accept the connection
and enter your device’s PIN code.
7. Once successfully paired to a headset,
displays in the Status area.
USC_T0_QRM_75X105.indd 49 9/27/2012 9:16:21 PM