111
4
When the search is complete, all available Bluetooth
devices are listed. Select the Headset from the list
and click the Next button.
A Bluetooth device is represented by the device type
and name (Dedicated Bluetooth ID).
To use the Bluetooth headset, Bluetooth Pairing
Mode is required. For the procedures to set up
Pairing Mode, refer to the Headset Manual.
5
Enter the PIN in the device PIN eld and click the
Next button.
For pairing, a PIN is required. Since a PIN is provided
by the headset manufacturer, refer to the corresponding
manual.
6
If the Completing the Add Bluetooth Device Wizard
window appears, click Finish.
7
The stereo headset is connected and you can now
use the Bluetooth headset normally.
If you cannot hear sound from the headset, you have
to check Playback Device setting. Click the Start >
Control Panel > Hardware and Sound > Sound
and make sure the default Playback Device is set to
Bluetooth Headset.
To Next Page
Loading...
