Samsung NP-X360 - TPM Settings

151
Initializing the Security Platform
Before using TPM, you have to rst initialize the Security
Platform. In the Security Platform initialization step,
you can select automatic backup and the password
reconguration function.
1
Click Start > All Programs > Inneon Security
Platform Solution > Security Platform
Management > User Settings.
(Alternatively double-click the Security Platform
icon in the Taskbar.)
2
If a window appears asking whether you want to
start The Inneon Security Platform Initialization
Wizard, click OK.
In the start screen, click Next.
If the Trusted Platform Module activation screen
appears, check TPM State in the BIOS setup and make
sure TPM State is set to Enable & Activate. For how
to check TPM State in the BiOS setup, refer to the
‘Initailzing a TPM chip’ section.
161
3
Select Initialize a new Security Platform and click
the Next button.
4
Enter a password and click the Next button.
TPM Settings