Samsung NP-X360 - Expresscard Slot (Optional)

64
To insert a card
1
Insert a card into the slot on the side of the
computer.
ExpressCard Slot
2
If you insert a card into the slot, Windows recognizes
the card automatically or a message telling you to
install a driver appears.
If the card is not automatically recognized, install the
device driver supplied with the card.
If a window asking whether you want to scan and
change appears, click on Continue Without Scan.
This will proceed to Step 2 above.
To remove a PC card
1
Double-click the Safely Remove Hardware icon
on the taskbar.
2
Select the card to be removed and click Stop.
3
If the Stop a Hardware device window appears,
click the OK button.
4
Push the card in the slot lightly.
Then the card pops up.
5
Eject the card.
ExpressCard Slot (Optional)
You can use Express cards using this slot.
The ExpressCard slot can be regarded as the next generation PCMCIA card specication and supports LAN, TV
Tuner and Sound cards. This computer’s slot supports the Express Card/34 specication.
Before You Start!
 Remove the dummy card installed to protect the slot rst. Lightly push the dummy card of the slot. The dummy card pops up.
Eject the dummy card.

This slot is a ExpressCard slot. You cannot connect a PCMCIA card here.