Samsung NP-X360 - Viewing through a Monitor; TV

67
Switching the Display Device using the
Shortcut Key
Press the Fn + key combination once. Then the
Easy Display Manager screen appears in which you can
select a display device.
Whenever you press the
key while holding down the
Fn key, the selected option is changed.
Example) Selecting LCD+CRT Dual View
 LCD: Notebook Screen

CRT: External Monitor Screen

HDMI : TV Screen or Monitor (when it is connected
via the HDMI port).

LCD+CRT Clone : Notebook+ External Monitor
Screen

LCD+CRT DualView: Notebook+ External Monitor
Screen in Dual View

LCD+HDMI Clone: Notebook+ TV(or Monitor)
Screen

LCD+HDMI DualView: Notebook+ TV(or Monitor)
Screen Dualview

What is Dual View?
Dual View is a function that enables you to view
a computer screen over two display devices. It is
convenient when you need a wide screen.
 The TV screen is only supported for models that
support the TV output port (HDMI).

Simultaneous output to all 3 (LCD + CRT + HDMI) is
not supported.

External Monitor / TV is not supported in the DOS
Command Prompt window.
Viewing Through a Monitor / TV
You can switch the display device using the shortcut key.