EasyManua.ls Logo

Samsung NP-X360 - Battery; Installing;Removing the Battery

Samsung NP-X360
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
177
1
Shutdown the system, close the LCD panel and
place the computer upside down on a at surface. 2
Pull the two battery latches outwards , then
remove the battery.
Battery
Please refer to the following instructions when running the computer on battery power without connecting the AC
power.
A Lithium-Ion smart battery is supplied with this computer.
Before You Start!
Carefully read and follow the precautions printed on the battery before using the battery.
Precautions
Use only chargers specied in the User Manual.
Never heat the battery pack, put it near or in a re or use at a temperature higher than 60°C, as this may cause re.
Never cause a short circuit between the battery pack terminals or disassemble the battery pack.
Carefully read and follow the precautions printed on the battery and the safety instructions in the User Manual before using the
battery.
Please refer to the system operation environment (
226) of this manual and operate and store the battery at room temperature.
Installing/Removing the Battery

Table of Contents

Related product manuals