Samsung NP-X360 - Using Samsung Magic Doctor (Optional)

140
Conguring the McAfee Firewall
The McAfee Firewall is congured for the product when
purchasing the product in order to protect the computer
from viruses. However, if the rewall is activated, you may
not connect to the network or the Internet properly. In this
case, you have to change the settings as follows.
Method 1) When you need to select Allow Access
in the Server or Internet Access Request
window.
When you connect to a bank, stock market, or gaming
website, an access request window appears. In this case,
select Allow Access in the window and click OK. Then
you can install the program normally or open the page.
Method 2) When you need to deactivate the Firewall
If you cannot connect to the Internet when using a
broadband Internet service, you can connect to the
Internal normally if you disable the McAfee Firewall.
However, since it may cause a security problem, be
careful when doing so.
z Double-click the McAfee Security Center icon from
the Desktop.
x Click the Advanced menu at the bottom left and click
Congure > Internet&Network.
c Turn the Internet&Network at the right to Off, set the
Select when to re-enable rewall to Never and then
click OK.
v Click Home in the left menu pane and click Ignore
next to the ‘Firewall protection is disabled’
message.
It is recommended activating the Windows Firewall for
your computer's safety when you have disabled the
McAfee Firewall. To activate the Windows Firewall,
click Start > Control Panel>Security>Turn Windows
Firewall on or off> On(recommended) (When your
Control Panel is set to the 'Classic View' of Windows
Vista or when you are using Windows XP, click Start
> Control Panel > Windows Firewall > Change
Settings > On(recommended).)