53
- This Document can not be used without Samsung's authorization -
Ⅳ. FIRMWARE
2. Connect the AC adapter or a fully charged battery.
* To upgrade the firmware, the battery level indicator
on the LCD monitor must be full (level three).
3. Turn on the camera and select SCENE, using the Mode Dial.
1. Insert the SD card containing the
firmware file into the camera.
* Updating the firmware will delete all the data in the Flash memory. Be sure to back up all the data onto
your PC before updating the firmware. The firmware file name is always "nv2_104W.bin".
3. Upgrading the Firmware
To Next Page
Loading...
