63
- This Document can not be used without Samsung's authorization -
Ⅴ. ADJUSTMENT
▷Although each adjustment can be done separately, there may be adjustments that have to be done
before some of the others.
• The OIS centering process has to be carried out prior to all the adjustment processes, except for the
inspection process.
•「CCD Gain」must precede 「Shutter Close Time」or「Strobo Exposure Test」.
•「PUNT Adjustment」must precede 「Taking Resolution Chart」.
• Most of the adjustments that may cause serious problems are listed in the integrated adjustment.
Therefore, if you follow the sequence, there should be no problems.
To Next Page
Loading...
