Why are my Samsung NX58*565 Ranges burners not burning evenly?
If your burners aren't burning evenly, it could be due to incorrectly assembled or unlevel surface burner components and caps. Also, dirty surface burners can cause uneven flames. Clean the surface burner components thoroughly.
What does it mean if my Samsung NX58*565 oven control beeps and displays an error code?
If the oven control beeps and shows an error code, it indicates a function error. To resolve this, press the OFF/CLEAR pad and restart the oven. If the issue continues, disconnect the power to the range for at least 30 seconds, then reconnect it. If the problem persists after these steps, it is recommended to call for service.
Why is my Samsung NX58*565 Ranges oven light not turning on?
If the oven light isn't working, first check if the oven door lock is turned on. If it is, hold the oven door open and press the START/SET pad for 3 seconds until the Lock icon turns off. Also, check if the Sabbath function has been activated; if so, press and hold the SABBATH pad for 3 seconds to deactivate it. If neither of these is the issue, check for a loose or burned-out bulb.
Why is there a very large or yellow surface burner flame on my Samsung NX58*565?
If you have very large or yellow surface burner flames, it could be due to the wrong orifice being assembled. Contact your installer to check the burner orifice size and verify the LP gas conversion.
Why won't all the burners light on my Samsung NX58*565 Ranges?
If all burners fail to light, several factors could be responsible. First, ensure the power cord is properly plugged into a functioning, grounded electrical outlet. Next, check your home's fuse box or circuit breaker and replace any blown fuses or reset tripped breakers. Finally, verify that the gas supply is correctly connected and turned on, referring to the Installation Instructions for guidance.
Why is there a burning or oily odor emitting from the vent of my Samsung Ranges?
A burning or oily odor from the vent is normal for a new oven and should disappear within 1/2 hour of the first bake cycle. To speed up the process, set a self-cleaning cycle for a minimum of 3 hours.
Why is my Samsung NX58*565 oven door not opening after a self-cleaning cycle?
The oven door will remain locked until the oven temperature drops below 350 °F. This is normal.
Why is my Samsung NX58*565 Ranges not level?
If your range isn't level, it could be due to improper installation or damaged leveling legs. Ensure the floor is level, strong, and stable; contact a carpenter if it sags or slopes. Check and adjust the leveling legs. Additionally, misaligned kitchen cabinets can create the appearance of an unlevel range, so ensure cabinets are square and provide sufficient room for installation.
Why is my Samsung Ranges oven burner not shutting off?
If the oven burner won't shut off, it could be due to the oven door lock being activated. The display will show the Lock icon. Hold the oven door open and press the START/SET pad for 3 seconds to deactivate it. Alternatively, the Sabbath function might be enabled, indicated by 'SAb' and the time of day on the display. To turn off only the oven, press the OFF/CLEAR pad. To fully cancel the Sabbath function, press and hold the SABBATH pad for 3 seconds.
Why does my Samsung Ranges surface burner click during operation?
If a surface burner clicks during operation, it might be because the control knob has been left in the LITE position. After the burner lights, turn the control knob to the desired setting. If the clicking continues, it is recommended to contact a service technician.
General| Type | Freestanding |
|---|---|
| Fuel Type | Gas |
| Cooktop Type | Gas |
| Number of Burners | 5 |
| Self-Cleaning | Yes |
| Convection Oven | Yes |
| Wi-Fi Connectivity | No |
| Color | Stainless Steel |
| Width | 30 inch |
| Burner Power | 18, 000 BTU |
| Cooktop Material | Porcelain |
| Ignition Type | Electric |
Highlights the 5.8 cubic feet capacity for convenience.
Lists basic precautions to reduce risks of fire, shock, injury, or death.
Critical safety advice for handling gas and preventing leaks.
Outlines requirements to avoid electric shock and fire hazards.
Provides warnings and precautions to protect children from range hazards.
Details safety measures during self-cleaning cycles.
Introduces the range model and its components.
Step-by-step guide for igniting gas surface burners.
Offers guidance on selecting appropriate cookware for optimal results.
Identifies and explains the function of oven control buttons and display.
Details on using the oven's baking function and setting temperatures.
Explains how convection cooking circulates heat for even results.
Instructions for setting the oven to cook for a specific duration.
Guidelines for using the Sabbath mode for religious observances.
Step-by-step guide to operate the warming drawer.
General instructions for cleaning the oven interior and control panel.
Procedures for cleaning the cooktop surface and controls.
Explains the self-cleaning process and safety precautions.
Steps to take if a gas leak is suspected.
Troubleshooting steps for when surface burners fail to ignite.
Common reasons and solutions for poor baking or roasting results.
Reasons why the self-cleaning function may not start.
Lists error codes and their meanings for quick reference.
Details the terms and conditions of the US product warranty.
Outlines the warranty terms for products purchased in Canada.
To Next Page