OfficeServ 7200 USER INSTRUCTIONS
TECHNICAL MANUAL PART 1 MAY 2009
1.16
1.12 SETTING STATION ON/OFF OPTIONS
The OfficeServ 7200 allows the system administrator to set any of the keyset features
listed below.
FEATURES DESCRIPTION
00
AUTO HOLD
Automatically places an existing C.O. call on
hold if a CALL button, trunk key or trunk route
key is pressed during that call.
01 AUTO TIMER
Automatically starts the stopwatch timer
during a C.O. call.
02 HEADSET USE
When ON, this feature disables the
hookswitch allowing a headset user to answer
all calls by pressing the ANS/RLS button.
03 HOT KEYPAD
When ON, this feature allows the user to dial
directory numbers without having to first lift
the handset or press the SPEAKER button.
04 KEY TONE
Allows the user to hear a slight tone when
pressing buttons on keyset.
05 PAGE REJOIN
Allows the user to hear the latter part of page
announcements if keyset becomes free during
a page.
06 RING PREF.
When OFF, requires the user to press the fast
flashing button to answer a ringing call after
lifting the handset.
07 NOT FOR USA
This field is reserved and can not be used for
U.S. software.
08 AUTO CAMP-ON
Keyset users can allow intercom calls to
camp-on to other keysets without having to
press a CAMP-ON key.
09 NOT FOR USA
10 AME PASSCODE
If this option is set to YES, station users who
have AME set must enter their station
password to listen to messages being left.
11 DISP SPD NAME
If this option is set to ON the user will have the
name associated with the speed dial number
shown in the display after the number has
been dialed.
To Next Page
Loading...
Need help?
General
