OfficeServ 7200 USER INSTRUCTIONS
TECHNICAL MANUAL PART 1 MAY 2009
1.8
1.5 SETTING YOUR ANSWER MODE
Each keyset can have its answer mode for intercom calls set to one of the following
options:
RING MODE—The station will ring in one of eight custom ring patterns. Calls are
answered by pressing the ANS/RLS key or lifting the handset.
AUTO ANSWER MODE—After giving a short attention tone, the station will
automatically answer calls on the speakerphone. When a C.O. line is transferred to a
station in Auto Answer, the screened portion of the call will be Auto Answer, but the
keyset will ring when the transfer is complete if the user has not pressed the ANS/RLS
key or lifted the handset.
VOICE ANNOUNCE—The station will not ring. After a short attention tone, callers can
make an announcement. The called party must press the ANS/RLS key or lift the
handset to reply.
ACTION DISPLAY
1. Press the transfer key followed by 103
Display shows
[201] ANS MODE
RING MODE
2. Dial 0, 1 or 2 to change the ring mode, e.g., 2
OR
[201] ANS MODE
VOICE ANNOUNCE
Press UP or DOWN to select the ring mode
3. Press the transfer key to store and exit
To Next Page
Loading...
Need help?
General
