OfficeServ 7100 USER INSTRUCTIONS
TECHNICAL MANUAL PART 1 JANUARY 2009
1.15
FEATURES DESCRIPTION
13 SECURE OHVA
When set to OFF an OHVA will be heard
through the keyset speaker rather than the
handset.
14 NOT FOR USA
15 AUTO ANS CO
This option determines whether CO calls
arriving at a station will be auto answered if
auto answer is selected in MMC 103
.
16 ENBLOCK 2LED
For ITP phones with 2 Line Display
Set to ON will require user to press SEND
button to make a call, it works like a cell
phone. Enblock dialing must be enabled in
MMC 861
.
17 STN NO RING
When ON all incoming calls will not ring at
stations.
18
FEATURE TONE (NOT FOR USE IN US).
19
RCV GPU INFO
Enables members of a pickup group with
“RCV GRP INFO” set to ON, to receive a
short ring burst along with the call info
when another member of the pickup group
receives a call.
20
MISSED CALLS
When set to ON the station will display
information about missed calls as well as
the ID of the most recent missed calls.
21
NO DISP TRK#
When set to ON, the feature disables the
trunk number from being displayed on
outgoing calls.
ACTION DISPLAY
1. Press the transfer key followed by 110
Display shows
[201] STN ON/OFF
AUTO HOLD :OFF
2. Dial the option number from above list
(e.g., 4)
[201] STN ON/OFF
HOT KEYPAD :OFF
Press UP or DOWN to select the option and
Press the right soft key to move the
cursor
3. Press UP or DOWN to select ON or OFF
Press the left or right soft key to return to
[201] STN ON/OFF
HOT KEYPAD :ON
step 2
OR
Dial 1 for ON or 0 for OFF
To Next Page
Loading...
